2014 Can-Am Spyder STS - SM5

Sold

Basic Info

Mileage 3,483
VIN 2BXNCAC14EV000188
Stock # CAN000188L

Description

* 2014 CAN-AM SPYDER STS - SM5
* NADA Retail Value $13,355
* 3483 Miles
* White Pearl Tricoat paint
* Rotax 998 cc V-twin, liquid-cooled, fuel-injected engine that produces 100 horsepower at 7,500 rpm
* SM-5 Five Speed Manual Transmission.
* These backwards trikes have become increasingly popular over the last few years. The design for this has been around for over 100 years with the 1884 Butler Petrol Cycle, but until Can-Am started building these and making them a stylish, rideable bike with all the modern upgrades like Fuel Injection, anti-lock brakes and power steering, they never caught on. Because of the stability factor, they open up the motorcycle world to some people that never thought they could ride on their own.
* This bike should give you plenty of trouble free riding. Very clean and well cared for and is easy to maneuver. It is ready to ride.
Call our sales associates today so we can get your knees in the breeze on this low mileage trike, A.S.A.P

View More

Condition Assessment

  • Pass
  • Fail
  • Notes
  • All dash and interior lights
  • All guages and clock function properly
  • Hazard light switch
  • Headlights work (both low/high beams) and are sufficiently bright and aligned
  • Horn works
  • Radio and associated components function
  • Overall condition of all interior trim and rubber seals
  • Battery correct and charged
  • Charging system
  • Fuse box properly attached and tight
  • Steering pull and operation
  • Brake pull/operation
  • Idle
  • Off-idle acceleration
  • Noises
  • Smoke from exhaust
  • Vibrations
  • WOT acceleration
  • Smells
  • Rear end chatter
  • Clutch/linkage/trans operation
  • Missing nuts/bolts/washers
  • Overall condition
  • Operation of heat riser
  • Hangars broken or torn
  • Fit (check for exhaust brushing against other components)
  • Air Pressure
  • Brake Lines
  • Brake pads/shoes (pull off all drums)
  • Check for leaks at lines,fittings and at master cylinder and booster (if applicable)
  • Check for pull
  • Condition and thickness of pads,rotors,shoes
  • Operation of foot pedal and proper return
  • All trim in place
  • Decals
  • Outside mirrors
  • Paint condition and shine
  • All comonents in place
  • Check torque on common loosened bolts/fittings
  • Shocks
  • Wheel bearings
  • Turn signals work and cancel
  • A/C Operation (if applicable)
  • Air Filter Condition
  • Belts and Pulley Condition and Trueness
  • Carburetor Function
  • Carburetor Type
  • Choke
  • Cooling System Leaks
  • Engine Displacement
  • Engine Type
  • Fan Operation and Clearance
  • Fuel Leaks
  • Idle Speed
  • Ignition Timing and Point Gap/Dwell
  • Leaks (above and below)
  • Major Decals Present
  • Oil Level
  • Radiator Cap
  • Smog System Operation
  • Starts Easily and Runs
  • Vacuum Leaks
  • Valve Train Noise
  • Water Temperature Guage
  • Wires,Caps,Rotor check for condition
  • Back-up switch in place and functioning
  • Clutch Operation
  • Fluid Level
  • Hand shift tightness,operation and not contacting interior components
  • Leaks
  • Linkage Operation
  • Noises not common to particular transmission
  • Shift Boot
  • Speedometer cable in place and not rubbing against other components
  • Type
  • Check for and aft spacing
  • Condition and tightness of U-joints
  • Condition of chrome/paint/trim components
  • Dry rot in rubber
  • Emergency brake
  • Lug nuts torqued
  • Mag wheels/hub caps
  • Tire Pressure
  • Tire Tread
  • Wheel Bearing
  • Grease in fittings
  • Chrome
  • Dings/dents/chips
  • Alignment of all panels
  • Hood raises and lowers properly and stays up
  • Hood pull functions correctly
  • Window operation
  • Check for rust/water under trunk mat
  • Jack,spare,hold down and inflator (when applicable)
  • Lid opens/locks with key
  • Lid stays up when opened
  • Light functions (if applicable)
  • Trunk Finish
  • Trunk Mat
  • All lines attached correctly and run properly
  • Bent metal
  • Finish correct
  • Floor panel seals intact
  • Loose bolts (sub frame,frame,ect)
  • Open areas to interior or trunk
  • Paint chips
  • Rust
  • Fluid level
  • Front end alignment (or 4-wheel if applicable)
  • Power assist reservoir and line leaks
  • Steering column tightness and operation (both under hood and inside at steering wheel)
  • Fuel filter correctness and condition
  • Gas Cap
  • Gas Level (minimum of 1/8 tank)
  • Leaks at tank,filter or lines

About Us

Virtual Tour

    Frequently Asked Questions

26